Corners of CHINA Manufactured stone veneer 

In order to emulate a solid wall installation, stone should appear to interlock. The installer should avoid a straight grout joint creating vertical line along a wall. For an interior corner, alternate the stone returning to the wall from wall to wall. An experienced installer will be able to execute an interior or exterior corner to create an authentic appearance of a stonewall. Some designers may choose to vary the colors of the stone at the corners to create the appearance of corner quoins, a traditional detail highlighting stone at corners or at the foundation area of a building.


At Grade 
Building code officials should approve any installations where stone will be installed to grade. Most building codes require specific moisture barriers and/or insulation to be applied as part of a wall system at grade. There are also requirements for how close to grade a veneer product can be placed. A typical installation will require theCHINA Manufactured stone veneer to be terminated a minimum of 4 in. above the earth surface and 2 in. above any paved surface. In general, corrosion-resistant flashing must be installed around all penetrations and terminations of veneer application. Flashing should be applied in accordance to local building requirements.edited by china stone veneer manufacturers Interior/Exterior/Fireplace